Eldes Cloud Services is a complete and flexible platform which allows remote control, configuration and data saving. In a secure and stable way you can operate the system via web or your mobile phone. Whether you are a distributor or end user you can use Eldes Cloud Services to expand security and automation. This cloud-based platfrom suits for both: residential and commercial applications.
8-ch IP video input, 50Mbps incoming bandwidth, 80Mbps outgoing bandwidth, 6MP recording resolution, 12VDC, WIFI router
Battery POWER BUBBLE 7Ah 12V AP7/12 (China)
Battery POWER BUBBLE 7Ah 12V
Ethernet communicator ELAN3-ALARM
The device is synced with alarm system ESIM364 and GSM/GPRS communicator ET082. ELAN3-ALARM is an Ethernet-based communicator that enables instant Internet access, allowing to establish a communication between ESIM364 or ET082 and EGR100, Kronos IP, SIA IP protocol-based monitoring station software. The product can be used to connect ESIM364 to Eldes Smart Security platform. Ethernet communicator enables remote configuration of ESIM364 and ET082. ELAN3-ALARM suits where GSM/GPRS connection is weak, it also works as additional backup connection.
T10 is a data transmitting device for transmitting information of intruder and fire alarm control panel to monitoring and alarm receiving centre (MARC) at a licensed VHF radio frequency
Optex RX-Core-ST PIR
RX-CORE series successfully take over a leadership position built by authentic RX-40 series and is now with newly implemented technologies in pursuit of higher satisfaction.
Replacement Prisms for Reflective Beam Smoke Detectors Also used for “Retro Mode” with the Fireray 2000.
INIM SmartLine020 (Italy)
Conventional control panels with 2 zones, or 4 zones expandable to 20
Impulse power supply 12V/1A PB-12-1
Impulse power supply unit 12V/1A
Relay module SS (Lithuania)
Relay module for fire detectors
Hikvision DS-2CD2720F-IZ (China)
2MP (1920 x 1080) high resolution, 2.8-12mm motorized vari-focal lens, Up to 30m IR visibility, True day/night, 3D DNR & DWDR & BLC, IP67 rating, Vandal-proof housing
DSC Neo HS2ICN (Canada)
ICON Hardwired Keypad HS2ICN
PoE extender IMG-E4-POE
PoE extender IMG-E4-POE, 1xIN, 4xOUT
Multiple security cable SCHNUR 4x022
4 core alarm cable
POWER BUBBLE PBA-806C
POWER BUBBLE PBA-806C, infrared sensor
Impulse power supply 3A/12V without case PBHD1203-02B
Impulse power supply without metal case, output voltage 12V ÷ 13,4 VDC, with battery charge.
4-Wire Sealed Indoor/Outdoor Proximity Reader and Keypad
Electromagnetic Lock PBM-180 (180kg)
Electromagnetic Lock POWER BUBBLE YM-180 (180kg), 170Lx41.4Wx20.5H(mm)
XP95 Manual Call Point
The XP95 Manual Call Point is compliant with EN54-11. The address of each call point is set at the commissioning stage by means of a seven segment DIL switch. The device features plug and play terminal connections and a resettable element.
The FP3 is a unique manual call point, with high visibility LED, and which includes both frangible and resettable windows. It also offers user friendly selection of the monitoring resistors, 470 and 680ohms and normally open contact. A CPD approved liftup cover is also available.
SD218 stand-alone smoke detector
9V DC, 85dB, LED indication, TEST button
Auto Cable Collector
Signaline Heat sensing cable is frequently installed around the rim of a floating tank. Maintaining an electrical connection between the heat sensing cable on the tank roof and the top of the tank can be a problem due to the rise and fall of the floating roof. When the tank is full, the cable is stowed within the Signaline Auto Collector. The Auto Collector automatically unreels the connecting cable as the roof level falls and rereels the cable into the collector as the roof rises. It is a mechanical device and does not require a power supply.
Zinc plated steel clip with santoprene cushion insulator.
Signaline Fixed Temperature Heat Sensing Cable (Signaline FT) detects a build up of heat anywhere along its length. When any point along the length of the cable reaches a predetermined temperature an alarm is initiated.
HD-SKM03 (For conventional systems)
The Signaline HD Controller providesearly warning of an impending fire by detecting overheating in cable ducts, road tunnels, escalators, lift shafts, conveyer belts and similar difficult to monitor environments. The system uses Signaline HD analogue heat sensing cable and a Signaline HD controller plus an end of line terminal box. The sensor cable is a specially constructed coaxial cable. When the cable is heated there is a corresponding change in the electrical characteristics of the cable. This change is monitored by the control-ler which when sufficient causes an alarm. The controller constantly monitors for open and short circuit faults in the cable. Signaline HD cable is resettableand therefore may be physically heat tested any num-ber of times by the application of heat in order to testthe system, however, if it is destroyed by overheat-ing or fire, the damaged section must be replaced.
Signaline HD is an analogue heat sensing cable that monitors significant increases in temperature. An electronic ontroller connected to the cable monitors the condition of the cable to sense any change in temperature by continually measuring the electrical resistance between the metallic core and screen. If the change in temperature is sufficient the controller creates an alarm. The controller is easily adjusted for the length of cable being used. Most importantly analogue heat sensing cable is resettable.
RARC software is used for management of PRTxxEM and PRTxxMF series readers. Program allows for complete reader’s configuration as well as for downloading events logged in its memory. RARC program allows also for utilizing PRTxxEM and PRTxxMF series readers for proximity cards programming.